| 
 
	
		
			
				| 
					
				 | 
				 | 
				
					
						
							  Phantom Miro eX2 | 
						 
						
							 | 
						 
						
							| - 고속카메라 | 
						 
						
							| - supplies 640 x 480 resolution at up to 1000 fps | 
						 
						
							 | 
						 
						
							 | 
						 
						
							 | 
						 
						
							 | 
						 
						
							 | 
						 
						
							 | 
						 
						
							 | 
						 
						
							
														 
							 
							  | 
						 
					 
				 | 
			 
		 
	 | 
 
	 | 
 
 
    | 
        
         사양 
  
| 
 Resolution  | 
 FPS  |  
| 
 640 x 480  | 
 1,240  |  
| 
 512 x 480  | 
 1,540  |  
| 
 512 x 64  | 
 10,700  |  
| 
 320 x 240  | 
 4,700  |  
| 
 256 x 480  | 
 2,900  |  
| 
 256 x 192  | 
 7,130  |  
| 
 256 x 64  | 
 19,400  |  
| 
 128 x 128  | 
 18,200  |  
| 
 128 x 64  | 
 32,200  |  
| 
 64 x 64  | 
 48,100  |  
| 
 32 x 32  | 
 86,900  |  
| 
 32 x 16  | 
 105,200  |   
  
  
      
 
| Short Description | 
        
- The workhorse of the Miro® family, supplies 640 x 480 resolution at up to 1000 fps. Built-in LCD screen, battery power, variable resolution and shutter choices
         |  
| Throughput/Speed | 
        
- Max speed at full resolution of 640 x 480 is 1246 fps to RAM 
         
- Max speed at reduced resolution of 32 x 8 is 105,200 fps to RAM
         |  
| Sensor Specifications | 
        
- CMOS sensor
         
- 640 x 480 Pixels
         
- 22 µm pixel size
         
- 10-bit depth
         
- Active sensor dimensions are 14.08 mm x 10.56 mm
         
- ISO is 4800 mono, 1200 color
         
- CAR in 32 x 8 pixel increments
         
- Fill factor: 65%
         
- Dynamic range: 60 dB
         
- Read out noise at 45°C (typical): 21e-
         
- Full well capacity (typical): 22000e-
         |  
| Exposure | 
        
- Minimum exposure time is 5 µs
         
- Global electronic shutter
         |  
| Memory | 
        
- 2 GB or 4 GB high-speed internal RAM 
         
- Removable CompactFlash™ 
         |  
| Record Times | 
        
- 2.82 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum internal memory
         |  
| Special Features | 
        
- Segment memory for up to 4 cines 
         
- Continuous recording
         
- Frame rate profile
         
- Memory gate
         
- Frame timestamp
         
- IRIG in/out (modulated and unmodulated)
         
- LCD touch screen monitor / user interface (640 x 480) 3.5 in
         
- Secondary IP address
         
- Field-based firmware upgrade capable
         
- EDR
         
- Auto Exposure
         |  
| Triggering | 
        
- Programmable trigger location (pre/post trigger recording)
         
- Image-Based Auto-Trigger standard
         
- On-camera trigger button
         
- LCD touch screen button
         
- Hardware trigger
         |  
| Timing & Synchronization | 
 |  
| Signaling | 
 |  
| Ethernet Connection | 
        
- 10/100 Ethernet for both control and data
         |  
| Camera Control | 
        
- Phantom Camera Control software (PCC)
         
- SDK available
         |  
| Video Out | 
 |  
| Lensing | 
 |  
| Video Processing | 
        
- Brightness
         
- Gain
         
- Gamma
         
- Saturation
         
- Hue
         
- White Balance
         
- Color interpolation algorith
         
- Filters
         
- Color matrix
         
- Image flip and rotate
         
- Crop
         
- Scale
         |  
| Data Acquisition | 
        
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
         |  
| Motion Analysis | 
        
- Basic measurements via Phantom Application:
         
- Distance
         
- Speed
         
- Acceleration
         
- Angles and Angular Speed
         
- Manual and Automatic point collection for target tracking
         
- Compatible with 3rd party solutions
         |  
| Supported File Formats | 
        
- Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
         |  
| Power | 
        
- 15-28 VDC, 12W
         
- Battery removable, replaceable Li-Ion, 7.4V, BP-511
         |  
| Mechanical Specifications | 
        
- 3 x 3.75 x 3 in (L, W, H)
         
- 7 x 9.5 x 7 cm (L, W, H)
         
- Weight: 1.5 lbs, 0.7 kg
         |  
| Environmental Specifications | 
        
- Active cooling with dual internal micro-fans;
         
- Operating temperature 0°C - 50°C
         
- Storage temperature -20°C - 70°C
         |  
| APIs | 
        
- Phantom SDK
         
- LabView
         
- MatLab
         |  
| Ships Standard With | 
        
- Power supply
         
- Ethernet cable
         
- PCC software
         
- Getting Started guide
         |  
| Options | 
        
- 10-bit depth
         
- Image-Based Auto-Trigger
         |  
| Popular Accessories | 
 |   
        
                
 | 
 
 
    | 
        
        
                
 | 
 
 
 
  
  
 |